Basic Specification

Detail Description

Application
 
Environment : working temperature -15?C～+40?C
                          humidity ≤50% 
                          lifetime:more than 3 years
Replace:          can directly replace lights with other sources,
                          such as Incandescent lamp,Energy-saving lamp,
                          Promise lamp,Mercury lamp,Sodium lamp.
                         Such as compare with energy-saving light source
                            in the same angle :80W is same as 200W,
                           100W same as 250W, 120W same as 300W.
Site:                  Indoor workshop

Outline  

Structure:  
   Reflection Cup: Spinning with 1070 aluminum plate with 1.5mm
   Sunflower Radiator:6063-T5 extrusion section,turning technology.
   Power Supply Box:Die-casting aluminum, octangle.
   Light Source Holder:Injection molding with porcelain PC of 94V0
                                       fireproof level.
   Hemispherical Lampshade: Injection molding with milky PC                                                               materials.      
Chip:   International or  domestic famous COB 80W/100W120W.
Power Supply:   Isolation output
Protection: IP40
The EMC and HI-pot: EN60598-2008
 
Power Supply Parameter
 

 
Feathers

..Using high power LED light source, higher luminous efficiency,
     more energy saving.
.. Hemispherical emulsification lampshade spread light firstly, soft        light too,then reflection cup distributes the light secondary.
.. Four combined COB chips will lower the cost more.
.. Fix the light source on the bottom of reflection cup,effectively use      the reflective cup as a radiator,lower the cost,reduce the volume
     and weight of the radiator too.